Local manufacturers have answered the call, boosting the supply of facemasks for COVID-19.

surgeon with face mask on

Surgical face masks have come to be the global symbol of COVID-19.

You will have seen the tired faces of front line doctors and nurses around the world, bruised from continual face mask wearing.

You’re probably also aware we have limited supplies for these front-line workers because so many other people are stocking up and there have been disruptions to the global supply chain.

More people have started wearing face masks here in Australia too. Staff at the local GP, shop keepers and the general public are all hoping they will fend off the virus.

But when is wearing a face mask actually beneficial? And with surging demand and broken global supply chains, how can we be sure we’ll have enough?

It’s important to understand when surgical face masks provide protection. And when they don’t. The Australian Department of Health says face masks are of most benefit to health care workers in frequent close contact with sick people. And to those who already have COVID-19. This is so they don’t cough on others and spread the disease. 

How do surgical face masks work?

A surgical face mask protects those working closely with infected people from others’ coughs and sneezes. Coughs and sneezes send out droplets of bodily fluids that may contain germs or respiratory viruses. You can also wear a mask if you are sick to protect others from your bodily fluids.

Surgical masks are made from felt that is fine enough to filter out most small particles, including pathogens. To be effective you must wear them according to the manufacturers’ instructions. It’s important not to touch the mask until you remove it. They’re also single-use so you need to dispose of them after wear.

pile of flat packed face masks in plastic wrappers

Face masks are in demand during the Covid-19 pandemic.

Addressing a global shortage

COVID-19 began impacting Australia in February 2020. Early on surgical face masks were identified as an important resource in the fight against the virus. By mid-March confirmed cases were rising and this caused a surge in global demand.

With a disrupted global supply chain, local manufacturers have been addressing shortages of medical equipment and the materials to make them. Manufacturing businesses responded quickly.

Local manufacturer Textor Technologies was one of these companies. It has been adapting its facilities to make the special filtration fabric suitable for supply to local companies that manufacture surgical face masks.

Using our Pilot-Scale Production Facility at Waurn Ponds, near Geelong in Victoria, Textor has been working to speed up development and manufacture of certain filtration fabric. We’ll test the performance of the fabric before it goes on to testing against Australian Standards. If successful, Textor may produce the material at commercial scale.

Local businesses to the rescue

Surgical mask manufacturer Med-Con will use suitable material to make the finished surgical masks. Until recently, this small company in country Victoria had been Australia’s only manufacturer of surgical masks.

Med-Con typically produces around two million masks per year out of its Shepparton facility. But as a result of COVID-19, the small business is now increasing its production by at least tenfold. This will mean introducing more machines to its factory and increasing its workforce to cope with the demand.

Our agile manufacturers are rising to the COVID-19 challenge. Businesses like Textor and Med-Con are trying to ensure Australia’s medical professionals are better equipped to treat patients with the virus.

person in factory at Textor Technologies production facility with moisture-trapping fabric co-developed with CSIRO. Rolls of fabric in background.

We helped develop moisture-trapping fabric with Textor Technologies.

Designing 3D printed masks

In another Team Australia approach, we have been working with Flinders University, University of South Australia and Detmold to provide advice and equipment for a new mask testing facility in South Australia, which will test locally made respirators and surgical masks.

Our data and technology science specialists at Data61 are also using 3D printing to produce two designs of protective face shields for Queensland healthcare workers. While usually reserved for research purposes, we’re using nearly all our polymer 3D printers to print short runs of shield frames as part of a state-wide collaborative effort. We expect to be supplying 300 to 500 units this month. This contribution will ensure that Queensland healthcare workers have sufficient protective equipment available to meet current demands while Australian industry adapts to mass manufacture these kinds of items.

Further tips on face-mask wearing during COVID-19 can be found via the Australian Government’s Department of Health.


  1. For the past 1.6 years we just buy from ..made in china…..and nothing is recycled or reused…. probably burnt. So where can citizens and industry buy CSIRO PPE products?

  2. I’m looking for setup a small mask manufacturing unit in Victoria so where from I can get information for startup.

  3. Thank you for your work on testing face masks.
    Meanwhile, I want to make my own washable masks with a pocket for the filter material (which I understand is not washable). Are you able to suggest a good filter material and where to buy it please?

  4. Re mask manufacture in Australia, please note potential problems:
    • Many common flatpacked “surgical masks” have a problem – the inside and outside are not labelled; thus when a mask is refitted for any reason (eg drink of water), it could easily become the other way around, transferring virus to the airway. Please ensure INSIDE and OUTSIDE are labelled. Exhalation Valves
    • Authorities have not recognised the exhalation valves which are fitted to many shaped masks. This means the outgoing breath is not filtered, and one infected person will potentially contaminate the air and nearby surfaces with the virus. Even in use in hospitals!

  5. It is good to see local companies supporting the community, I think it is good to support locally made, but in times of need like this sometimes buying and using what is available is more important to hep prevent the spread of COVID-19. https://invisibledefender.com.au/

What do you think?

We love hearing from you, but we have a few guidelines.