Got a rainwater tank? Thinking of getting one? Well, you'll want to keep mozzies, sludge and fecal matter out of them - and here are the 5 tips for how.
The humble rainwater tank sits silently, dutifully doing its part for the environment - and your wallet. Image: Michael Coghlan
The humble rainwater tank sits silently, dutifully doing its part for the environment - and your wallet. Image: Michael Coghlan

The humble rainwater tank sits silently, dutifully doing its part for the environment – and your wallet. Image: Michael Coghlan

Australia is the driest populated continent in the world, and yet our water consumption per person is among the highest on the planet. For Australians, water is scarce and how we manage this resource is a concern for us all.

It’s no surprise that people are looking to install some form of water catchment for their property. Recent data shows that 26 per cent of Australian homes have already installed a rainwater tank and an overwhelming majority reported that they are positive about the tanks.

From saving money on your water bills to the conservation of a valuable natural resource, there is a lot to like about the humble rainwater tank.

They can even have other positive flow-on effects for the community. For example, the use of rainwater tanks in urban areas can relieve pressure on public infrastructure because of reduced stormwater runoff. We’ve also seen the popularity of rainwater tanks increase year on year, with the ABS reporting that the total storage capacity in Australia has gone up by 30 per cent between 2006 and 2011.

This is all very encouraging news for the environment – but, it’s not all drinking water and skittles. Just like buying a puppy dog or a Tamagotchi, owning a rainwater tank comes with its own responsibilities.

A recent study we conducted with the Smart Water Fund has shown that households may not be aware of some of the maintenance requirements that come with rainwater tank ownership.

In the report, Survey of savings and conditions of rainwater tanks, we conducted extensive research into rainwater systems across Melbourne, looking at the efficiency of the tanks and the water savings that can be generated at an individual household level.

One of the most interesting findings was lack of awareness around maintenance. Only 58 per cent of Melbournians indicated that they have conducted some form of maintenance on their system.

It’s important to know that the installation of a rainwater tank isn’t a set-and-forget scenario. There are some maintenance tasks that are unavoidable if you want to keep the tank healthy and efficient.

So here are our top tips for rainwater tank owners, or those considering a purchase in the near future.

Top 5 tips for maintaining your rainwater tank

  1. Get your mind (and the leaves) out of the gutter – every 3 months 
  • Cleaning out the gutters is a simple way to improve the water quality and the efficiency of the tank.
  • 4 per cent of tested households were found to have faecal matter in the gutters. In addition, 31 per cent of sites inspected were found to have half or completely full gutters.
  • Look into installing gutter meshing.

  1. Mozzie mesh – every 3 months
  • A rainwater tank is a great place for mosquitoes and pests to set up shop and thrive.
  • Of the tanks reviewed in the study 91.1 per cent had mosquito meshing, but more than 10 per cent were in a condition that would allow pests or vermin into the tank.
  • Poorly maintained mesh can pose a risk to the health of the community, particularly if populations of disease carrying insects are free to multiply in the rainwater tank hotel in your backyard.

  1. Spend some quality time getting to know your water quality – every 6 months
  • A majority of households use rainwater for the toilet or the washing machine so cleanliness of the water is less important. However, for those properties that use the water for showers, drinking or cooking, checking the water is crucial.
  • We found 57 per cent of tanks had discoloured water and 19 per cent had odorous water, while 25 per cent of tanks had medium or high concentrations of sediment.

  1. Pump it real good – every 6 months
  • The condition of the pumps and outlets will affect the quality of the water and the efficiency of how the household can access and use the water. A well-maintained system can also protect against long-term damage.
  • Our report found that in homes with pumps installed, 5 per cent were not functioning and 18 per cent of properties inspected were reported to have leaky pipes.

  1. It’s time to desludge
  • Standards Australia recommends that households organise the removal of sediment with a qualified contractor once every two to three years.
  • You probably don’t want to be dealing with this water.

The report also advises should check to make sure tank foundations are even, and that the tank has a reliable water switch.

If you would like to review the report in full you can find it here.

Save

34 comments

  1. This is useful advice keeping gutters clean and flushing inlet pipes regularly works wonders. Some tank filter nets that exclude leaves and mosquitoes are made in europe and do not last well in high UV environments. I have had to replace one basket on my pioneer tank and now ensure UV is excluded from where pipe comes into tank. Another tip is to put gaffer tape over any plastic tap hanldes on tank outlet taps as they are also UV sensitive over the long haul.

  2. WA Health Department Guidelines also have recommendations for chlorinating tank water as follows – directly from their website:
    Prior to consumption you are advised to disinfect your drinking water as follows:
    After Delivery treat the drinking water with either;
    • 7 grams of calcium hypochlorite (60 to 70% strength) per 1000 litres of water;
    or
    • 40 ml of sodium hypochlorite (12.5% solution) per 1000 litres of water.
    Leave the treated water for at least 24 hours to allow the chlorine taste and smell to dissipate.
    To Maintain a Safe Water Supply after the initial dose add either:
    • 1 gram of calcium hypochlorite (60-70%) per 1000 litres;
    or • 4 ml of sodium hypochlorite (12.5%) per 1000 litres
    each week to the holding tank and allow to stand for a minimum of 2 hours prior to consumption

  3. Thanks for the helpful tips. A bit of maintenance every once in a while can go a long way. it all depends on how you maintain the tank in the first place.

  4. I notice a lot of newly installed tanks with inlet pipes rising up the side of the tank. Buried pipes connect the risers to the down pipes. These pipes are therefor continuously water filled to the level of the tank inlet. I have always found that water to be malodorous, murky, and warm or hot depending on weather and shading (as bad as any leaf and water filled gutter). What are the recommendations or standards relating to inlet piping.

  5. Thanks for the tips! I’ve just started using a water tank, so now I just need to know how to maintain it properly. I like your first tip to clean your gutters every three months. It seems like keeping your gutter clear of leaves and debris would be a good way to improve tank efficiency and keep your water clean.

What do you think?

We love hearing from you, but we have a few guidelines.